How to Start Up Your Sprinkler System in the Spring
When to turn your system back on, what to check and how to adjust your heads after a Michigan winter.
Start up your sprinkler system once nighttime temperatures no longer fall below freezing, which is usually May in Southeast Michigan. Follow a start-up checklist, reset your controller clock, run each zone to check for leaks and broken heads, and adjust any heads that are watering the wrong area.
After a Michigan winter, your sprinkler system needs a proper start-up before it goes back to work. Turn it on too early and a late freeze can damage it. Skip the inspection and a broken head or leak can waste water for weeks before you notice. Here is how to time your start-up and what to check along the way.
Step 1: Wait until the freezes are over
Most sprinkler start-ups in Southeast Michigan are done in May. The rule of thumb is simple: it is safe to start up your system once nighttime temperatures no longer fall below freezing. Below-freezing temperatures can damage a system that has water in it.
Step 2: Follow the start-up guide
Maddox has a step-by-step guide for starting up your own system. Download the spring start-up instructions (PDF) and follow them in order.
Step 3: Check your controller
Your controller may need attention after sitting all winter, especially if the power went out at some point:
- Non-volatile memory controllers hold their program for up to 30 days without power and resume on schedule when power returns.
- Battery backup controllers keep their program as long as the battery lasts.
- Controllers with no backup need to be reprogrammed after every power loss.
Most timers keep the program but need the clock (time of day) reset. This is also a good time to consider a smart Wi-Fi controller and rain sensor, which adjust watering automatically and can save up to 35% on your water bill.
Step 4: Run each zone and walk your yard
Run every zone one at a time and watch it work. Look for broken or stuck heads, leaks, spots that are not getting water and heads spraying your house, driveway or walks instead of your lawn and beds.
Step 5: Adjust your heads
If a rotor is watering the wrong area, you can usually adjust it yourself. Instructions are available for Hunter PGP, Hunter PGJ, Hunter I-20, Rain Bird 5000 and MP Rotator heads. Lost your Hunter PGP key? Pick one up at your local irrigation distributor, most big box stores like Home Depot and Lowe's, or contact us.
When to call a professional
If a zone will not turn on, you find a leak or broken pipe, or you would simply rather not deal with it, schedule a spring start-up with Maddox. Our service technicians check every zone, make repairs from fully equipped trucks and get your system ready for the season. Learn more about sprinkler repair and start-ups.
Schedule your spring start-up
Let a Maddox technician get your system ready for the season.







